Additional Linux microPlatform Targets

This section provides information on running the Linux microPlatform for other targets. It is provided on a best-effort basis.

Prebuilt Binaries

Several boards have reference builds provided by Open Source Foundries in the latest Linux microPlatform release, available at https://foundries.io/r/.

Please note that these builds are provided for reference in hopes they are useful; not all receive equal testing.

BeagleBone Black

Set MACHINE to beaglebone when setting up your work environment with the setup-environment script:

MACHINE=beaglebone source setup-environment [BUILDDIR]

At the end of the build, your build artifacts will be found under deploy/images/beaglebone. The artifact you will use to flash your microSD card is lmp-gateway-image-beaglebone.wic.gz.

To flash your microSD card, run:

gunzip -f lmp-gateway-image-beaglebone.wic.gz
sudo dd if=lmp-gateway-image-beaglebone.wic of=/dev/mmcblkX bs=4M

Where /dev/mmcblkX is your SD card device.

Please see https://elinux.org/Beagleboard:BeagleBoneBlack for additional board documentation.

HummingBoard 2

Set MACHINE to cubox-i when setting up your work environment with the setup-environment script:

MACHINE=cubox-i source setup-environment [BUILDDIR]

At the end of the build, your build artifacts will be found under deploy/images/cubox-i. The artifact you will use to flash your microSD card is lmp-gateway-image-cubox-i.wic.gz.

To flash your microSD card, run:

gunzip -f lmp-gateway-image-cubox-i.wic.gz
sudo dd if=lmp-gateway-image-cubox-i.wic of=/dev/mmcblkX bs=4M

Where /dev/mmcblkX is your SD card device.

Please see https://wiki.solid-run.com/doku.php?id=products:imx6:hummingboard for additional board documentation.

96Boards HiKey

Set MACHINE to hikey when setting up your work environment with the setup-environment script:

MACHINE=hikey source setup-environment [BUILDDIR]

At the end of the build, your build artifacts will be found under deploy/images/hikey.

To convert the rootfs to a fastboot-compatible format, run:

gunzip -f lmp-gateway-image-hikey.ext4.gz
ext2simg -v lmp-gateway-image-hikey.ext4 lmp-gateway-image-hikey.img

To flash your HiKey over micro-USB:

fastboot flash boot boot-hikey.uefi.img
fastboot flash system lmp-gateway-image-hikey.img

Please see https://github.com/96boards/documentation/tree/master/ConsumerEdition/HiKey for additional board documentation.

96Boards DragonBoard 410c

Set MACHINE to dragonboard-410c when setting up your work environment with the setup-environment script:

MACHINE=dragonboard-410c source setup-environment [BUILDDIR]

At the end of the build, your build artifacts will be found under deploy/images/dragonboard-410c.

To convert the rootfs to a fastboot-compatible format:

gunzip -f lmp-gateway-image-dragonboard-410c.ext4.gz
ext2simg -v lmp-gateway-image-dragonboard-410c.ext4 lmp-gateway-image-dragonboard-410c.img

To flash your DragonBoard 410c over micro-USB:

fastboot flash boot boot.img
fastboot flash rootfs lmp-gateway-image-dragonboard-410c.img

Please see https://github.com/96boards/documentation/tree/master/ConsumerEdition/DragonBoard-410c for additional board documentation.